Do's & Don'ts of Candle Making
Publicado por Crystal Phillips en
- Add your fragrance at the right temp: Adding your fragrance oil when your wax is at the proper temperature will help it bind to the wax, which will help give you a stronger scent throw. It is usually recommended to add your fragrance to the wax at 180-185F for soy and paraffin wax 200-205F for palm wax.
- Stir consistently for at least 3-5 minutes: This is also very important. Stirring for a short amount of time can keep your fragrance oil from binding to the wax. This can cause the oil to settle to the bottom of the wax which can also result in a weak scent throw.
- Trim your wick: Not trimming your wick can result in smoke, soot, mushrooming, and can cause a large flame. It's important to keep your wick trimmed so your candle burns properly, and for your safety.
- Preheat your containers: Preheating your containers will help slow down the cooling process & helps prevent the wax from shrinking and pulling away from the container, developing wet spots.
- Use a thermometer: You always want to monitor your temperature throughout the whole candle making process. Doing so will prevent you from scorching the wax and it will ensure that you are adding fragrance and pouring the wax at the recommended temperatures.
- Use the right size and type of wick: Using a wick that is too small for your container can result in the wax not burning across the full diameter of your candle, and it can affect your scent throw. You'll also want to make sure you are using the right type of wick for your wax. Zinc core wicks, for example, don't always perform well in natural waxes like soy because they do not usually get hot enough to burn the wax properly.
- ALWAYS TEST ONE OF YOUR CANDLES: A common mistake that many first-time candle makers make is mass producing their candles before they do a test burn. There are many different things that can affect the way your candle burns and it is always a good idea to test everything together to make sure it burns properly and gives you the result you want.
- Use crayons to dye your candles: Crayon wax is not meant to be burned like candle wax. Using crayons can clog your wick, which can cause the candle to burn poorly. Crayons can also affect your scent throw and possibly give off a bad smell. Always use dyes that are made for candles to ensure that you are creating a quality candle that will burn well.
- Melt your wax in the microwave: When melting your wax in the microwave, you will not be able to monitor the temperature of the wax. It may not melt evenly and you risk scorching your wax in certain areas. Scorched wax can result in a very unappealing odor that is similar to burned popcorn.
- Use perfume in place of fragrance oils: Just like crayons, perfume is NOT meant to burn. It will not throw well and it could clog your wick. Always use fragrance oils that are designed for candle making.
- Burn your candle for more than 3-4 hours: After burning your candle 3-4 hours, your wick will need to be trimmed. Continuing to burn the candle after that amount of time can result in lots of smoke, soot, and mushrooming on the end of the wick. This can cause your hot throw to be masked by that smoky smell and could be a fire hazard if your flame gets too big!
- Put your candle in the refrigerator: While you will be anxious for your candle to set up completely, putting your candle in the refrigerator will speed up the cooling process but can "hurt" your candle in a few different ways. It can cause the glass to crack or shatter, make the wax shrink up and create wet spots or sink holes, and even weaken the scent throw.
- Add too much fragrance: Using more fragrance oil does not always guarantee a stronger scent throw. Each wax has a recommended fragrance oil load and going beyond that limit can cause the fragrance oil to separate from the wax which could be a potential fire hazard .Too much fragrance can also cause the wick to clog which will make your candle have a weak scent throw.